|
[Barefoot
Coral Calcium Plus | Barefoot Marine Coral Minerals]
[Halstead Stony Coral Minerals | Coral Calcium Powder]
[Source Naturals Coral Calcium] Barefoot
Coral Calcium Plus
Barefoot Marine Coral Minerals
These
two products are formulated from the same coral calcium mined from
below-sea deposits. Barefoot Coral Calcium Plus has added
vitamins. The following Certificate of Analysis (COA) has been
provided by the manufacturer. Coral calcium is a product with natural
variability in its content. The manufacturer states that their
labels run on the conservative side.
DESCRIPTION/SPECIFICATIONS
PARTS
USED: Coral grains
COUNTRY OF ORIGIN: Japan
CHEMICAL CONSTITUENTS: Min 20% Calcium carbonate, and
Min 10% Magnesium
carbonate
ORGANOLEPTIC DATA:
Appearance: White powder
Odor: Odorless
Taste: Tasteless
PHYSICAL DATA:
Bulk density: 1.05 gm/ml
Moisture: Less than 1%
pH (10% soln): 9.6
Particle size: Less than 45 microns
CHEMICAL DATA:
Total ash content: 55 gm
Heavy metal content:
Arsenic: Less than 2 ppm
Lead: Less than 1 ppm
Mercury: Less than 0.1 ppm
Copper: Less than 2 ppm
Pesticide content: Not detected
MICROBIOLOGY
Standard plate count: Less than 3,000 cfu/gm
Staphylococcus: Negative
Escherichia coll: Negative
Samonella sp: Negative
Pseudomonas aeruginosa: Negative
Yeasts and Molds: Less than 100 cfu/gm
NUTRITION PROFILE (per 100 grams):
Calories 187
Carbohydrates: 43 gm
Proteins: 0.2 gm
Total fat: 1.5 gm
Total dietary fiber: 40 gm
Soluble fiber: 4.4 gm
Sodium: 17.5 mg
Iron: 6.1 mg
Potassium: 69 mg
Copper: 1.2 gm
Vitamin C: 0.6 mg
Vitamin A 20 IU
STORAGE:
Stock: Store in a cool, dry
area in a sealed container.
Shelf-life: Information not
available.
Sample I.D.: SMP-44
Lot MTILK
Lab # 84637
Procedure: The SMP-44
Lot# MTILK sample was diluted as necessary
in glass Class A volumetric flasks. The elements Chloride, Flouride, and
Bromine were analyzed via ion Chromatography (I.C.). Cold Vapor Atomic
Absorption (CVAA) was used for analysis of Mercury. Graphite Furnace
Atomic Absorption (GFAA) was the method used to determine Arsenic,
Selenium, Lead, and Antimony. Semi-quantitative analysis for all other
elements was carried out using Inductively Coupled Plasma – Optical
Emission Spectrometry (ICP-OES).
REPORT OF ANALYSIS
ANALYTE
UNITS Lot# MTILK ANALYTE UNITS
Lot# MTILK
Aluminum ppm
72 Mercury ppm <0.005
Antimony ppm 1.97 Molybdenum ppm
<0.01
Arsenic ppm <0.03 Neodymium ppm
1.29
Barium ppm 1.80 Nickel
ppm 0.11
Beryllium ppm <0.01 Niobium
ppm 0.022
Bismuth ppm 5.15 Osmium
ppm <0.01
Boron ppm 2.30 Palladium
ppm 0.007
Bromine ppm 6.58 Phosphorus ppm
63.7
Cadmium ppm 0.022 Platinum ppm
<0.005
Calcium ppm 289,000 Potassium ppm
69.5
Carbon ppm 12,000 Praseodymium ppm
1.82
Cerium ppm 2.01 Rhenium
ppm 0.033
Cesium ppm 0.209 Rhodium
ppm 0.008
Chloride ppm 142 Rubidium
ppm 16.3
Chromium ppm 3.11 Ruthenium ppm
0.003
Cobalt ppm <0.02 Samarium
ppm 0.98
Copper ppm 3.01 Scandium
ppm 0.017
Dysprosium ppm 0.51 Selenium ppm
0.019
Erbium ppm 6.22 Silicon
ppm 215
Europium ppm 1.09 Silver
ppm <0.01
Flouride ppm 0.39 Sodium
ppm 490
Gadolinium ppm 0.59 Strontium
ppm 148
Gallium ppm 0.39 Sulfur
ppm 397
Germanium ppm 5.21 Tantalum ppm
2.88
Gold ppm <0.01 Tellurium
ppm 0.03
Hafnium ppm 0.019 Terbium
ppm 0.040
Holmium ppm <0.01 Thallium ppm
2.97
Indium ppm <0.03 Thorium
ppm 0.22
Iodine ppm 7.21 Thulium
ppm <0.03
Iridium ppm <0.01 Tin
ppm 0.041
Iron ppm 129 Titanium
ppm 0.031
Lanthanum ppm <0.03 Tungsten ppm
<0.01
Lead ppm <0.03 Vanadium
ppm 210
Lithium ppm 1.57 Ytterbium
ppm 0.039
Lutetium ppm 0.018 Yttrium
ppm <0.005
Magnesium ppm 97,000 Zinc
ppm 2.95
Manganese ppm 5.32 Zirconium ppm
0.44
< = no quantities of
this analyte detected above the stated limit.
back
to top
Halstead
Stony Coral Minerals
Coral Calcium Power
These
two products are formulated from the same coral calcium mined from
above-sea deposits. The certificate of analysis (COA) is thus the
same for them. Coral calcium is a product with natural variability in its
content. The manufacturer states that their labels run on the
conservative side.
Analysis Requested:
Total elemental composition of Lot #PR1726A
Sample I.D.: Lot #PRQ726A
Lab # 84462
Procedure: The Lot #PR1726A
sample was diluted as necessary in glass Class A volumetric flasks. The
elements Chloride, Flouride, and Bromine were analyzed via ion
Chromatography (I.C.). Cold Vapor Atomic Absorption (CVAA) was used for
analysis of Mercury. Graphite Furnace Atomic Absorption (GFAA) was the
method used to determine Arsenic, Selenium, Lead, and Antimony.
Semi-quantitative analysis for all other elements was carried out using
Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES).
REPORT OF ANALYSIS
ANALYTE
UNITS Lot# PR1726A ANALYTE UNITS
Lot#PR1726A
Aluminum ppm
5.89 Mercury ppm <0.005
Antimony ppm 3.97 Molybdenum ppm
0.066
Arsenic ppm <0.08 Neodymium ppm
0.81
Barium ppm 0.29 Nickel
ppm 0.09
Beryllium ppm <0.05 Niobium
ppm 0.94
Bismuth ppm <0.02 Osmium ppm
<0.005
Boron ppm 29.5 Palladium
ppm <0.005
Bromine ppm 3.87 Phosphorus ppm
<0.005
Cadmium ppm 0.031 Platinum ppm
<0.005
Calcium ppm 387,000 Potassium ppm
29.7
Carbon ppm 11,900 Praseodymium ppm
0.69
Cerium ppm 1.87 Rhenium
ppm <0.02
Cesium ppm 0.108 Rhodium
ppm <0.005
Chloride ppm 87.1 Rubidium
ppm 30.1
Chromium ppm 2.79 Ruthenium ppm
0.091
Cobalt ppm <0.02 Samarium
ppm 1.37
Copper ppm 2.09 Scandium
ppm <0.005
Dysprosium ppm 1.27 Selenium ppm
0.055
Erbium ppm 7.88 Silicon
ppm 490
Europium ppm 0.030 Silver
ppm <0.01
Flouride ppm 0.099 Sodium
ppm 160
Gadolinium ppm 1.92 Strontium
ppm 7.15
Gallium ppm <0.02 Sulfur
ppm 49.7
Germanium ppm <0.01 Tantalum ppm
0.58
Gold ppm <0.005 Tellurium
ppm 41.1
Hafnium ppm <0.02 Terbium
ppm 0.038
Holmium ppm <0.03 Thallium ppm
0.029
Indium ppm 0.033 Thorium
ppm <0.01
Iodine ppm 6.91 Thulium
ppm <0.01
Iridium ppm <0.005 Tin
ppm 0.093
Iron ppm 49.7 Titanium
ppm <0.005
Lanthanum ppm <0.05 Tungsten ppm
<0.05
Lead ppm 0.033 Vanadium
ppm 2.98
Lithium ppm 0.37 Ytterbium
ppm <0.005
Lutetium ppm 0.018 Yttrium
ppm 0.694
Magnesium ppm 8920 Zinc
ppm 0.088
Manganese ppm 4.79 Zirconium ppm
0.59
< = no quantities of
this analyte detected above the stated limit.
back
to top
Source Naturals
Coral Calcium
The
Source Naturals Coral Calcium is formulated from coral calcium mined from
above-sea deposits. The following Certificate of Analysis (COA) has been
provided by the manufacturer.
Date:
January 31, 2003
Name of Sample: Sango (Coral Mineral Powder), derived from Okinawa, Japan
Manufacturer's Lot #NMPR1726A, Threshold Lot #M123604, VGR Code: ZM 1075
Analysis
Specification Result
Color White / Ultra
clean white Conforms
Taste/odor Neutral Conforms
Calcium 35% or greater 38.4%
(Conforms)
Magnesium 6000 ppm or greater 12.,800 ppm
(Conforms)
Lead <0.35 ppm 0.08 ppm
(Conforms)
Mercury <0.1 ppm <0.005 ppm
(Conforms
Cadmium <.03 ppm 0.081 ppm
(Conforms)
Arsenic <0.5 ppm <0.03 ppm
(Conforms)
Aluminum <50 ppm 48.7 ppm
(Conforms)
Other Minerals with
no Listed Specification
Antimony ppm
1.89 Nickel ppm 0.025
Barium ppm 12.9 Niobium
ppm <0.01
Beryllium ppm <0.01 Osmium ppm
<0.01
Bismuth ppm 1.078 Palladium
ppm 0.007
Boron ppm 0.065 Phosphorus ppm
0.66
Bromine ppm 5.71 Platinum
ppm <0.005
Carbon ppm 114,000 Potassium ppm
21.7
Cerium ppm 1.94 Praseodymium ppm
4.76
Cesium ppm 0.411 Rhenium
ppm 0.031
Chloride ppm 204 Rhodium
ppm <0.005
Chromium ppm 4.09 Rubidium ppm
14.8
Cobalt ppm 0.101 Ruthenium
ppm 0.005
Copper ppm 5.26 Samarium
ppm 0.468
Dysprosium ppm 0.618 Scandium ppm
0.034
Erbium ppm 5.22 Selenium
ppm 0.031
Europium ppm <0.01 Silicon
ppm 394
Flouride ppm 0.57 Silver
ppm 0.022
Gadolinium ppm 0.747 Sodium
ppm 221
Gallium ppm 0.028 Strontium
ppm 127
Germanium ppm 0.046 Sulfur
ppm 688
Gold ppm <0.01 Tantalum
ppm 0.97
Hafnium ppm 0.387 Tellurium
ppm 0.166
Holmium ppm <0.01 Terbium ppm
0.051
Indium ppm 0.036 Thallium
ppm 3.06
Iodine ppm 10.4 Thorium
ppm 0.07
Iridium ppm <0.01 Thulium
ppm <0.03
Iron ppm 117 Tin
ppm 0.047
Lanthanum ppm <0.03 Titanium ppm
0.011
Lithium ppm 0.416 Tungsten
ppm <0.01
Lutetium ppm 0.019 Vanadium ppm
7.15
Manganese ppm 9.88 Ytterbium ppm
0.065
Molybdenum ppm <0.01
Yttrium ppm 1.07
Neodymium ppm 1.33
Zinc ppm 1.64
Zirconium ppm 0.637
The above information was obtained in part from our suppliers.
Respectfully submitted,
/s/
Norman F. Nelson, Ph.D.
Quality Control Director
Source Naturals, Inc.
back
to top
Reprinted with exclusive permission of Natures Benefit, Inc.
Reprinted
with exclusive permission of Source Naturals, Inc.
<<
back: 2 of 2
|
